Hostacom EKC 330N JXW BLACK high melt flow, medium high flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent impact/stiffness balance, good flowability properties and excellent scratch resistance. It is typically used for interior automotive applications.
Hostacom EKC 330N JXW BLACK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 18 g/10 min |
| Density | 1.02 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1700 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 19 MPa |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 35 kJ/m² |
| Charpy Impact Strength - Unnotched (23 °C, Type 1, Edgewise) | No Break kJ/m² |
| Heat Deflection Temperature A (1.80 MPa, Unannealed) | 56 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications